![]() |
![]() |
![]() |
|
|
|||||
|
|
|
||||
|
ASSEMBLY INSTRUCTIUONS: Step 1: Insert splice as shown in (illustration A), to combine 42" lengths into one 84" Step 2: Locate the 84" stationary bar 3/8" in from both the side edge and end of table (see illustrations B and C). Fasten in place using screws provided. Step 3: Locate the 42" stationary bar 3/8" in from end of table and butt against the 84" bar (see illustration B). Step 4: Using a carpenters, position the 42" bar to form a 90 degreeangle where the two stationary bars meet and secure with screws provided. Step 5: Slide clips onto stationary bars from open ends. Clips can be placed over floating bars. Use floating bars that approximate the length and width of the screen frame. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
We can be reached at 714 321 8109
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||
|