|
|
|
|
||
 |
 |
 |
|
 |
|
|
|
||||
|
Beat the Heat with Sun Shades! Click for .pdf version of ((Exterior & Interior Sun Shade Installation Instructions, Clutch)) Sun Shade Clutch Installation Instructions: 1. Mount the bracket: If the clutch is on the right end of the shade, attach the brackets to the window frame, window molding, wall or ceiling as shown below.
If the clutch is on the left end of the Sun Shade, reverse the bracket positions, left for right.
2. Install The Shade: A. Push the clutch straight onto the blade of its bracket. The bottom of the clutch should always point straight down. B. Lower the lug of the end plug onto the V of its bracket. The roller should fit in the brackets securely, with just a little play. 3. Use the Control Loop to operate the Sun Shade:
Pulling gently on the loop in one direction raises the shade; pulling it in the other direction lowers it. On Sun Shades where the fabric rolls toward the window, the front cord doaes the raising. On Sun Shades where the fabric rolls toward the room, the rear cord does the raising. CAUTION: THIS ROLL-UP SHADE HAS FACTORY PRE-SET STOP BALLS ON THE CHAIN. MOVING THE CHAIN OR UNROLLING THE SHADE BEFORE MOUNTING WILL CAUSE THE SHADE TO ROLL UP IMPROPERLY AND MAY CAUSE THE SHADE TO COMPLETELY DETACH FROM THE BAR
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
We will ship Interior and Exterior Sun Shades anywhere in the USAWe can be reached at 714 321 8109 Email Questions to: SunShades@wholesalescreensandglass.com
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||
|
