![]() |
![]() |
![]() |
|
|
|||||
|
|
|
||||
|
Beat the heat and experience the ultimate in Sun Shades! Roller Shade Measuring Instructions: Select the type of Mounting Determine whether the shade is going to be installed inside the opening (Mounting Area) or outside the opening (mounting area)
Inside Mount: Measure the Width and the Height for Inside Mount For the Width: measure across the top, middle and bottom of the opening (mounting area). Use the narrowest dimension and measur to the nearest 1/8" and subtract 1" (one inch) for exterior shade products and 1/4" (one quarter inch) for interior products. For the Height: measure the up and down dimensions one the left, center and right. Use the longest length measurement, measureing to the nearest 1/8". SHADES WILL BE BUILT AT OVERALL MEASUREMENTS GIVEN, NO DEDUCTIONS WILL BE TAKEN DURING MANUFACTURING Outside Mount: Measure the Width and the Height for Outside Mount Outside mount roller shades are mounted on the frame or wall surrounding the opening (mounting area). Measure the area that the roller shade is to cover overlapping the opening (mounting area) at least 1" on each side. Note: When outside mount shades are specified, No deductions are necessary. Outside mount fabric overlaps may differ with valance and housing options. Be aware that when fabric overlaps some exterior surfaces, it may cause damage to the fabrics or mounting surface. Confirming Measurements: The most common error in ordering roller (Sun) shades is reversing the width and height measurements. Always confirm that the width is the measurement that goes across from left to right and that the height is the measurement that goes from top to bottom.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
We will ship Interior and Exterior Sun Shades anywhere in the USAWe can be reached at 714 321 8109 Email Questions to: SunShades@wholesalescreensandglass.com
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||
|